ZXTM Horizontal Wind Profiler
• 17 horizontal ranges with configurable dwell times
• Wind characteristics: wind speed, shear, veer, wind yaw misalignment, turbulence, rotor equivalent wind speed (REWS), windflow complexity
• Wind speed range: < 0.5-45 m/s (wind loading survivability up to 70 m/s)
• Accuracy: Direction - 0.5°, Speed - 0.1 m/s
• 50 Hz /20 ms measurements (50 measurements per second)
• Measurement range: 10m - 550m 
• 3 year warranty included
• no factory maintenance or calibration required  in 3 year service period

• 800...1050 hPa
• Calibrated (ISO 17025) with traceable calibration certificate and mark (ilac-MRA) 
• Output signal: 0...5V DC 
• Supply Voltage: 8 ... 32 V
• Connector included
• Operating temperature: -40 ... 105°C  

• Certified verification of Remote Sensing Device (some may call it "calibration")
• Carried out in accordance to the IEC 61400-50-1 and IEC 61400-50-2, accredited as per ISO 17025
• Conducted at a 200m reference mast
• Procedure warrants lowest uncertainties, highest accuracy, and compliance in line with IEC, FGW and IEA

• Temperature:
    Range: -40 ... 80 °C
    Accuracy: ±0.1 °C
• Humidity:
    Range: 0 ... 100% rH
    Accuracy: ±1% rH
• Pressure:
    Range: 400 ... 1200 hPa
    Accuracy (400 ... 1100 hPa, –40 ... 85 °C): ±0.9 hPa
• Linearity Compensation: 32 points
• Interfaces: RS-485, SDI-12, USB
• IP 65
• Input Voltage: 5 ... 45 VDC

For Thies and Vector Instruments (Windspeed Ltd.) wind vanes:For Thies and Vector Instruments (Windspeed Ltd.) anemometer:
• Certified Maintenance (OEM TIER3 authorization)
• Certified refurbishment (OEM TIER3 authorization)
• Exchange of bearings, O-rings, sealings 
• Sensor Specific Report Certificate 
• Authorisation seal

• ​Ammonit Meteo-42M
• With new firmware version offering flexibility in the user setttings, sensor and modem configuration, data security, among others
• 8x analog voltage IN (± 0.1V, ± 1V, ± 10V 16bit)
• 8x pulse counter IN
• 4x digital serial status IN
• 1 RS485 Client IN (for up to 8 smart sensors or Ultra Sonic Anemometers)
• 4x analog voltage OUT (5V | Switches)
• 1x analog current OUT 
• 1 RS485 Server OUT (SCADA monitoring software)
• 3 USB (2x USB-A host, 1x USB-B device)
• 1 LAN (Ethernet)

• 3.1157.10.000
• 0...5V output, set 800...1060 hPa
• 300...1100 hPa scalable
• Long-term stability ±0.3 hPa/year
• Accuracy ±1.0 hPa (unheated)
• Accuracy ±0.25 hPa (heated)

• Module for 10 Ports / RS485 2-wire / Configurable UOUT
• Stabilised and ripple-free voltage output individually configurable
• 10 individually configurable ports
• One stabilised and ripple-free output with active current limit (110 mA)
• One configurable bus-termination resistor (120 Ω) for two-wire RS485 bus setup (half duplex)
• Each terminal comprises overvoltage protection

• ​Ammonit Meteo-40L Plus
• With new firmware version offering flexibility in the user setttings, sensor and modem configuration, data security, among others
• 12x analog voltage IN (± 0.1V, ± 1V, ± 10V 16bit)
• 2x analog current IN (± 1mA, ± 10mA, ± 100mA 16bit)
• 12x pulse counter IN
• 8x digital serial status IN
• 1 RS485 Master IN (for up to 8 smart sensors or Ultra Sonic Anemometers)
• 8x analog voltage OUT (5V | Switches)
• 2x analog current OUT 
• 1 RS485 Slave OUT (SCADA monitoring software)
• 3 USB (2x USB-A host, 1x USB-B device)
• 1 LAN (Ethernet)

• 4.3351.00.141
• Frequency output (1082 Hz at 50 m/s)
• Analogue output (4 ... 20 mA = 0.3...75 m/s)
• Supply 15 ... 24 V DC 
• Heated

• 4.3151.00.020 - TMR
• TMR-Sensor (Tunnel Magneto Resistance)
• Analog output: 0 ... VCC
• Measurement range: 0 ... 360°
• Accuracy:  ± 1°
• Resolution: 0.35 °
• Potentiometer/Electronics: 3.3 ... 12 VDC
• Heating: 24 V AC/DC, 25 W
• Current consumption: 0.4 mA @ 3.3 V, 0.9 mA @ 12V
• Operating speed: up to 75 m/s
• Survival speed: 85 m/s up to 0.5 h (without damages)
• IP 55

• Compliant to recommendations of FGW TR6, IEC and MEASNET
• Incl. calibration certificate
• Calibration standards traceable to ilac-MRA accreditation services

• 4.3351.00.000 - heated
• Frequency output (1082 Hz at 50 m/s)
• Class A compliance in accordance to IEC 61400-12-1 and 61400-12-1 Ed.2
• Supply 3.3 ... 42 V DC
• Measurement Range: 0.3...75 m/s
• Accuracy: 1% of value or <0.2 m/s (0.3...50m/s)
• Linearity: r>0.99999 (4...20 m/s)
• With heating (24V AC/DC, 25W)

• Compliant to recommendations of FGW TR6, IEC and MEASNET
• Incl. calibration certificate
• Calibration standards traceable to U.K.A.S and/or NIST/NVLAP accreditation service
• Executed by a third party accredited calibration laboratory (DIN EN ISO/ISO 17025)

For Thies and Vector Instruments (Windspeed Ltd.) wind vanes:

• Repair (costs are sensor specific and depend on malfunction found)
• Certificate
• Authorization seal

Scope & costs for repair depend on the individual sensor defects & conditions. A sensor specific offer will be made based upon inspection.
 

• ISO 9060: Secondary Standard
• Measurement range: 0 W/m² to 4000 W/m²
• Spectral range: 285 to 3000 nm
• Incl. calibration sheet (traceable to WRR)
• For Global Horizontal Irradiance (GHI) measurements (W/m2) 
• Sunshine duration (optional)
• With Pt100
• With heating

• 4.3129.60.701
• TMR-Sensor (Tunnel Magneto Resistance)
• Measurement range: 0...360°
• Dead band: without north gap 
• Measurement principle: magnetic
• Output: 10 bit serial-synchronous Gray-code
• Resolution: 0.35°
• Accuracy: ±1.5°
• With heating (24V AC / DC, 20W)
• Power Supply: 3.3 ... 30 V DC or 24 V AC